 |
| Quantity: | |
|---|---|
JV-555
JERVAY
ALL ROUND WET RUBBING FASTNESS IMPROVER JV-555
Eco friendly wet rubbing fastness improver for nylon
I. TECHNICAL INDICATORS
Appearance: light yellow to yellow transparent liquid
Ionic: weak cation
PH value: 4.5 ± 1 (pure water)
Solubility: easily dispersed in any proportion of tap water
II. MAIN COMPONENTS
Special Waterborne Polyurethane
III. PRODUCT PROFILE
The wet rubbing fastness of active, vulcanized, direct and indigo dyes on cellulose fibers is especially low when they are thick and dark, especially the wet rubbing fastness of big black, big red, emerald green and so on is often lower than grade 1, while the wet rubbing fastness of textiles exported to Europe and America requires more than grade 3; the wet rubbing fastness can fully meet this requirement. This product improves the stability of salt and alkali on the basis of raw materials and reduces the shortage of the structure of the product itself.
IV. MAIN PERFORMANCE
1. Without formaldehyde and APEO, it belongs to environmental protection products.
2. It can greatly improve the wet rubbing fastness by 1-1.5 grades, reaching more than 3 grades.
3. It is easy to use, and it can be used directly with water.
4. The handle of the fabric is soft, and has no effect on the color light and sunlight fastness.
V. APPLICATION METHODS
According to the type and concentration of dyes used and the types and forms of treated fabrics, the usage is as follows:
1. Dip rolling method: 30-50g / L; glacial acetic acid / citric acid: 0.5-1.0g/l
Process: dyed fabric (pH ≤ 6.5) → dip and roll (rolling yield: 80-85%) → drying
2. Impregnation method (limited to water treatment plant)
Dosage: 2-4% (o.w.f.)
Bath ratio: 1:10 ~ 20
Process: dyed fabric (pH ≤ 6.5) → dipping (room temperature, time: 20 ~ 30min) → drying
VI. POINTS FOR ATTENTION
1. Please use it immediately after preparation, and do a good job of sample test before use. The above process is only for reference.
2. It can only be used alone and can not be used in the same bath with silicone oil, softener, fixing agent and anionic auxiliary agent.
3. use a long time to produce a large amount of foam in the rolling tank. Remove foam or clean the groove and replace the working fluid before setting.
4. Try to keep the pH value of working fluid in the range of 4.5-5.5.
5. The temperature of working fluid should be controlled between 25 ℃ and room temperature.
6. Before use, clean the cloth surface alkali (control pH ≤ 6.5), salt and soaping agent.
7. The water used for working fluid should be tap water ≤ 100ppm, and groundwater or river water should be treated and reused.
VII. PACKAGING STORAGE
125kg / plastic barrel sealed at room temperature, shelf life of 6 months.
1.What is your terms of delivery?
EXW, FOB, CFR, CIF, D/P, D/A, DDU.
2.Do you test all your goods before delivery?
Yes, we have 100% test before delivery and can provide COA 24 hours online service, feel free to contact us at any time.
3.How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit, Meanwhile we respect every customer as our friend and we sincerely do business and make friends with them no matter where they come form.
4.How to know the exact price for textile chemicals color fixing agent for dying?
Tell us the specification request,quantity,packing,destination port and as much as order info, then we can check and reply you a latest and exact price.
ALL ROUND WET RUBBING FASTNESS IMPROVER JV-555
Eco friendly wet rubbing fastness improver for nylon
I. TECHNICAL INDICATORS
Appearance: light yellow to yellow transparent liquid
Ionic: weak cation
PH value: 4.5 ± 1 (pure water)
Solubility: easily dispersed in any proportion of tap water
II. MAIN COMPONENTS
Special Waterborne Polyurethane
III. PRODUCT PROFILE
The wet rubbing fastness of active, vulcanized, direct and indigo dyes on cellulose fibers is especially low when they are thick and dark, especially the wet rubbing fastness of big black, big red, emerald green and so on is often lower than grade 1, while the wet rubbing fastness of textiles exported to Europe and America requires more than grade 3; the wet rubbing fastness can fully meet this requirement. This product improves the stability of salt and alkali on the basis of raw materials and reduces the shortage of the structure of the product itself.
IV. MAIN PERFORMANCE
1. Without formaldehyde and APEO, it belongs to environmental protection products.
2. It can greatly improve the wet rubbing fastness by 1-1.5 grades, reaching more than 3 grades.
3. It is easy to use, and it can be used directly with water.
4. The handle of the fabric is soft, and has no effect on the color light and sunlight fastness.
V. APPLICATION METHODS
According to the type and concentration of dyes used and the types and forms of treated fabrics, the usage is as follows:
1. Dip rolling method: 30-50g / L; glacial acetic acid / citric acid: 0.5-1.0g/l
Process: dyed fabric (pH ≤ 6.5) → dip and roll (rolling yield: 80-85%) → drying
2. Impregnation method (limited to water treatment plant)
Dosage: 2-4% (o.w.f.)
Bath ratio: 1:10 ~ 20
Process: dyed fabric (pH ≤ 6.5) → dipping (room temperature, time: 20 ~ 30min) → drying
VI. POINTS FOR ATTENTION
1. Please use it immediately after preparation, and do a good job of sample test before use. The above process is only for reference.
2. It can only be used alone and can not be used in the same bath with silicone oil, softener, fixing agent and anionic auxiliary agent.
3. use a long time to produce a large amount of foam in the rolling tank. Remove foam or clean the groove and replace the working fluid before setting.
4. Try to keep the pH value of working fluid in the range of 4.5-5.5.
5. The temperature of working fluid should be controlled between 25 ℃ and room temperature.
6. Before use, clean the cloth surface alkali (control pH ≤ 6.5), salt and soaping agent.
7. The water used for working fluid should be tap water ≤ 100ppm, and groundwater or river water should be treated and reused.
VII. PACKAGING STORAGE
125kg / plastic barrel sealed at room temperature, shelf life of 6 months.
1.What is your terms of delivery?
EXW, FOB, CFR, CIF, D/P, D/A, DDU.
2.Do you test all your goods before delivery?
Yes, we have 100% test before delivery and can provide COA 24 hours online service, feel free to contact us at any time.
3.How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit, Meanwhile we respect every customer as our friend and we sincerely do business and make friends with them no matter where they come form.
4.How to know the exact price for textile chemicals color fixing agent for dying?
Tell us the specification request,quantity,packing,destination port and as much as order info, then we can check and reply you a latest and exact price.
