You are here: Home / Products / Functional finishing agent / Dry wet rubbing fastness improver / Cationic Rubbing Fastness Improver for Fabric And Cotton
Share to:

Cationic Rubbing Fastness Improver for Fabric And Cotton

Appearance: yellow and transparent mucus 
Ionic: weak cation
PH value: 3.5 ± 0.5 (50g / L)
Solubility: easily dispersed in any proportion of tap water
  • JV-525

Wet rubbing fastness improver JV-525

Direct dye wet rubbing fastness improver for TC


 I. Main Components      Special Waterborne Polyurethane


II. Product profile

Active, vulcanized, direct and indigo dyes have a particularly low fastness to wet friction when they are thick and dark on cellulose fibers, especially when they are less than 1 grade for large black, bright red and green blue, while for textiles exported to Europe and the United States, the fastness to wet friction requires more than 3 grades to improve the stability of the products to salt and alkali and to alleviate the shortage of the structure of the products themselves. Therefore, the JV-525 of environmentally friendly wet rubbing fastness agents has been specially developed.


III. Technical indicators

Appearance: yellow and transparent mucus (it will become deeper after long-term exposure)

Ionic: weak cation

PH value: 3.5 ± 0.5 (50g / L)

Solubility: easily dispersed in any proportion of tap water

 IV. Main Performance

1. This product does not contain formaldehyde and APEO. It belongs to environmental protection product and meets the requirements of EU Oeko-Tex Standard 100.

2. It can be used for fixing after dyeing cellulose fiber; it can greatly improve the wet rubbing fastness by 1-1.5 Grade 3 or above.

3. It is easy to use, and it can be used directly with water.

4. The handle of the fabric is soft, and has no effect on color and sunlight fastness.  


 V. Application Methods

According to the type and concentration of dyes used and the types and forms of treated fabrics, the usage is as follows:

1. Dip rolling method

Dosage: jv-525: 30-50g / L;

Process: dyed fabric (pH ≤ 7) → dip and roll (rolling yield: 80 ~ 85%) → drying

2. Impregnation method (limited to water treatment plant)

Dosage: jv-525: 2-4% (o.w.f.)

Bath ratio: 1:10 ~ 20

Process: dyed fabric (pH ≤ 7) → dipping (room temperature, time: 20 ~ 30min) → drying

 VI. Points for attention

1. It can only be used alone and can not be used in the same bath with silicone oil, softener, fixing agent and anionic auxiliary agent.

2. Please use it immediately after preparation, and do a good job of sample test before use. The above process is only for reference.

3. The temperature of working fluid should be controlled between 25 ℃ and room temperature.

4. Before using lifting agent jv-525, clean the cloth surface alkali (control pH ≤ 7), salt and soaping agent.

5. use a long time to produce a large amount of foam in the rolling tank. Clear the foam or clean the groove and replace the working fluid in time.

6. The water used for working fluid should be tap water ≤ 100ppm.

7. This product is not alkali resistant, and the pH value of the working fluid should be kept within the range of ≤ 5.5.


 VII. Packaging storage

125kg / plastic barrel sealed at room temperature, shelf life of 6 months.

1. I am not sure whether your product is appropriate in my case,what should i do?
The best way is according to your usage,we suggest you some samples,if you check is OK ,we will quote a price for you if you are satisfactory after the confirmation ,you can place an order.


2.I am a small wholesaler ,do you accept a small order ?
It is on problem if you are a small wholesaler,we would you like to grow up with together.


3.What is your production capacity?
Now we have developed our manufacturing capacity to 5000MT per month.

Dyeing and finishing Auxiliaries

Industiral Cleaning Agent

Contact us

  No.16,huacuiyi lane,qiaotou town,dongguan city,guangdong province,China



Contact person: Mr. Finn

Mobile No.: + 86 15014751722


Copyright © 2020 Dongguan Jervay Industrial Co. Ltd.      Support by leadong.