banner_product
Products
You are here: Home / Products / Functional finishing agent / Dry wet rubbing fastness improver / Cationic Rubbing Fastness Improver for Dark Denim Fabric
Share to:

Cationic Rubbing Fastness Improver for Dark Denim Fabric

Model:JV-555
Appearance: light yellow to yellow transparent liquid
Ionic: weak cation
PH value: 4.5 ± 1 (pure water)
Solubility: easily dispersed in any proportion of tap water
Availability:
Quantity:
  • JV-555
  • JERVAY

ALL ROUND WET RUBBING FASTNESS IMPROVER JV-555

cationic rubbing fastness improver for dark Denim fabric  



I. PRODUCT PROFILE

The wet rubbing fastness of active, vulcanized, direct and indigo dyes on cellulose fibers is especially low when they are thick and dark, especially the wet rubbing fastness of big black, big red, emerald green and so on is often lower than grade 1, while the wet rubbing fastness of textiles exported to Europe and America requires more than grade 3; the wet rubbing fastness can fully meet this requirement. This product improves the stability of salt and alkali on the basis of raw materials and reduces the shortage of the structure of the product itself.

 

 

II. TECHNICAL INDICATORS

Appearance: light yellow to yellow transparent liquid

Ionic: weak cation

PH value: 4.5 ± 1 (pure water)

Solubility: easily dispersed in any proportion of tap water


III. MAIN COMPONENTS     

Special Waterborne Polyurethane

 

IV. MAIN PERFORMANCE

1. Without formaldehyde and APEO, it belongs to environmental protection products.

2. It can greatly improve the wet rubbing fastness by 1-1.5 grades, reaching more than 3 grades.

3. It is easy to use, and it can be used directly with water.

4. The handle of the fabric is soft, and has no effect on the color light and sunlight fastness.

 

V. APPLICATION METHODS

According to the type and concentration of dyes used and the types and forms of treated fabrics, the usage is as follows:

1. Dip rolling method: 30-50g / L; glacial acetic acid / citric acid: 0.5-1.0g/l

Process: dyed fabric (pH ≤ 6.5) → dip and roll (rolling yield: 80-85%) → drying

2. Impregnation method (limited to water treatment plant)

Dosage: 2-4% (o.w.f.)

Bath ratio: 1:10 ~ 20

Process: dyed fabric (pH ≤ 6.5) → dipping (room temperature, time: 20 ~ 30min) → drying

 

VI. POINTS FOR ATTENTION

1. Please use it immediately after preparation, and do a good job of sample test before use. The above process is only for reference.

2. It can only be used alone and can not be used in the same bath with silicone oil, softener, fixing agent and anionic auxiliary agent.

3. use a long time to produce a large amount of foam in the rolling tank. Remove foam or clean the groove and replace the working fluid before setting.

4. Try to keep the pH value of working fluid in the range of 4.5-5.5.

5. The temperature of working fluid should be controlled between 25 ℃ and room temperature.

6. Before use, clean the cloth surface alkali (control pH ≤ 6.5), salt and soaping agent.

7. The water used for working fluid should be tap water ≤ 100ppm, and groundwater or river water should be treated and reused.

 

VII. PACKAGING STORAGE

125kg / plastic barrel sealed at room temperature, shelf life of 6 months.


1.Could we use our DHL/FEDEX/TNT account to ship the samples?

Yes, our products can use these express delivery to send samples. Our products are not dangerous goods, and we often send samples abroad to customers.


2.Can I get free samples?
We can provide you a certain amount of free samples,please contact us directly.

 

3. I am not sure whether your product is appropriate in my case,what should i do?
The best way is according to your usage,we suggest you some samples,if you check is OK ,we will quote a price for you if you are satisfactory after the confirmation ,you can place an order.


4.What is your production capacity?
Now we have developed our manufacturing capacity to 5000MT per month.



Previous: 
Next: 

Textile Auxiliaries

Dyeing and finishing Auxiliaries

Printing Auxiliaries

Industiral Cleaning Agent

Daily Chemical Raw Material

Contact us

  No.16,huacuiyi lane,qiaotou town,dongguan city,guangdong province,China

QUICK LINKS

PRODUCTS

Contact person: Mr. Finn

Mobile No.: + 86 15014751722

  

Copyright © 2022 Dongguan Jervay Industrial Co. Ltd.      Support by leadong.