Availability: | |
---|---|
Quantity: | |
C6103
JERVAY
Oil based waterproof agent C6103
EXCELLENT WATER REPELLENCY & HYDROLYSIS RESISTANCE ENVIRONMENT - FRIENDLY PRODUCT (PFOA FREE)
C6103 is solvent soluble fluoro chemical resin for P/U coating to make artificial leather, it can be mixed with P/U resin, DMF and toner.
Artificial leather treated by C6103 has got a excellent properties as water & oil repellency and chemical resistance(acid resistanceㆍ alkali resistanceㆍ especially, hydrolysis resistance).C6103 doesn't contain PFOA
(Perfluorooctanoic acid). It is a environment-friendly fluoro carbon base water repellent.
Appearance:Transparency or semi-transparency yellow liquid
Effective component:Above 60% (at 105℃ X 90min)
Viscosity:below 2000 cps (at 25℃)
Solvent:DMF / MEK
1. C6103 is PFOA free fluoro carbon base water repellent.
2. C6103 is a environment-friendly product.
3. C6103 has a very low surface tension energy.
4. C6103 has a excellent water & oil repellency.
5. P/U coating film treated by C6103 has got a excellent properties as chemical resistance(acid resistanceㆍalkali resistanceㆍespecially, hydrolysis resistance).
6. C6103 has low moisture absorbtion and high grade hydrostatic pressure effect to treated fabrics.
7. C6103 can be used mixing with P/U resin, solvent and toner without any catalyst and cross linker.
8. C6103 has a good compatibility with various P/U resin.
1. Artificial leather wet-dipping process.
* Recipe : PU Resin : 100
C6103 : 0.3 - 0.8
Toner : 5
DMF : 220 - 250
⇒ Parts of P/U resin 100
Picture (1)
A : NWF (220g/m²)
B : Dipping solution
C : Squeezing roller (Pick up : 700g/m²)
D : Heating drum (Semi-drying, Moisture : 20-50%)
E : Coating solution
F : Coagulation bath (DMF : 20-25% + Water : 75-80%, Temp : 25-35℃)
G : Washing
2. Artificial leather wet-coating process
* Recipe : PU Resin : 100
C6103 : 0.5 - 1.0
Toner : 5
DMF : 40 - 50
⇒ Parts of P/U resin 100
* rocess : Same as picture (1)
3. Water proof and breathable fabrics wet-coating process.
* Recipe : PU Resin : 100
Surfactant : 2 - 3
C6103 : 0.5 - 0.7
Toner : 5
DMF : 50 - 70
⇒ Parts of P/U resin 100
* Process
Picture (2)
A : Fabric G : Coagulation bath
B : Water bone W/R agent bath H : Washing bath
C : Mangle I : Dryer
D : Semi-dryer J : Finishing agent treating bath
E : Under-coating K : Curing tentor
F : Top-coating L : Finished fabric
4. Water proof and breathable fabrics dry-coating process.
* Recipe : PU Resin : 100
Surfactant : 2 - 3
C6103 : 0.2 - 0.6
Toner : 5
DMF : 50 - 70
⇒ Parts of P/U resin 100
* Process
A : Fabric D : Coating fabric
B : Resin E : Tentor
C : Coater F : Finished fabric
1. Store in -5℃ ~ 40℃. Avoid from direct fire and light.
2. Close a cover fasten.
< CAUTION >
Don't eat this product and further detail contents is in MSDS.
1.I don't know whether your product can be available, how can i order this from you?
It's the best way request sample from us, you test accord to our methods, and we will quote a price for you to check the cost. After confirm all of this. You can contact our place an order.
2.Can you make OEM service ?
Yes. We can accept OEM service. Also we have provided OEM service to lots of big and famous companies in the order.
3. Tell me what's your minimum order quantity ?
We can accept 500kgs of the MOQ.
4. How about your production capacity ?
By now, we have developed our manufacturing capability as 20MT per day, and more than 30000MT annual export.
Oil based waterproof agent C6103
EXCELLENT WATER REPELLENCY & HYDROLYSIS RESISTANCE ENVIRONMENT - FRIENDLY PRODUCT (PFOA FREE)
C6103 is solvent soluble fluoro chemical resin for P/U coating to make artificial leather, it can be mixed with P/U resin, DMF and toner.
Artificial leather treated by C6103 has got a excellent properties as water & oil repellency and chemical resistance(acid resistanceㆍ alkali resistanceㆍ especially, hydrolysis resistance).C6103 doesn't contain PFOA
(Perfluorooctanoic acid). It is a environment-friendly fluoro carbon base water repellent.
Appearance:Transparency or semi-transparency yellow liquid
Effective component:Above 60% (at 105℃ X 90min)
Viscosity:below 2000 cps (at 25℃)
Solvent:DMF / MEK
1. C6103 is PFOA free fluoro carbon base water repellent.
2. C6103 is a environment-friendly product.
3. C6103 has a very low surface tension energy.
4. C6103 has a excellent water & oil repellency.
5. P/U coating film treated by C6103 has got a excellent properties as chemical resistance(acid resistanceㆍalkali resistanceㆍespecially, hydrolysis resistance).
6. C6103 has low moisture absorbtion and high grade hydrostatic pressure effect to treated fabrics.
7. C6103 can be used mixing with P/U resin, solvent and toner without any catalyst and cross linker.
8. C6103 has a good compatibility with various P/U resin.
1. Artificial leather wet-dipping process.
* Recipe : PU Resin : 100
C6103 : 0.3 - 0.8
Toner : 5
DMF : 220 - 250
⇒ Parts of P/U resin 100
Picture (1)
A : NWF (220g/m²)
B : Dipping solution
C : Squeezing roller (Pick up : 700g/m²)
D : Heating drum (Semi-drying, Moisture : 20-50%)
E : Coating solution
F : Coagulation bath (DMF : 20-25% + Water : 75-80%, Temp : 25-35℃)
G : Washing
2. Artificial leather wet-coating process
* Recipe : PU Resin : 100
C6103 : 0.5 - 1.0
Toner : 5
DMF : 40 - 50
⇒ Parts of P/U resin 100
* rocess : Same as picture (1)
3. Water proof and breathable fabrics wet-coating process.
* Recipe : PU Resin : 100
Surfactant : 2 - 3
C6103 : 0.5 - 0.7
Toner : 5
DMF : 50 - 70
⇒ Parts of P/U resin 100
* Process
Picture (2)
A : Fabric G : Coagulation bath
B : Water bone W/R agent bath H : Washing bath
C : Mangle I : Dryer
D : Semi-dryer J : Finishing agent treating bath
E : Under-coating K : Curing tentor
F : Top-coating L : Finished fabric
4. Water proof and breathable fabrics dry-coating process.
* Recipe : PU Resin : 100
Surfactant : 2 - 3
C6103 : 0.2 - 0.6
Toner : 5
DMF : 50 - 70
⇒ Parts of P/U resin 100
* Process
A : Fabric D : Coating fabric
B : Resin E : Tentor
C : Coater F : Finished fabric
1. Store in -5℃ ~ 40℃. Avoid from direct fire and light.
2. Close a cover fasten.
< CAUTION >
Don't eat this product and further detail contents is in MSDS.
1.I don't know whether your product can be available, how can i order this from you?
It's the best way request sample from us, you test accord to our methods, and we will quote a price for you to check the cost. After confirm all of this. You can contact our place an order.
2.Can you make OEM service ?
Yes. We can accept OEM service. Also we have provided OEM service to lots of big and famous companies in the order.
3. Tell me what's your minimum order quantity ?
We can accept 500kgs of the MOQ.
4. How about your production capacity ?
By now, we have developed our manufacturing capability as 20MT per day, and more than 30000MT annual export.
Contact person: Mr. Finn
Mobile No.: + 86 15014751722