Oil based waterproof agent C6103

FLUORO CHEMICAL RESIN SOLUTION FOR ARTIFICIAL LEATHER

EXCELLENT WATER REPELLENCY & HYDROLYSIS RESISTANCE ENVIRONMENT - FRIENDLY PRODUCT (PFOA FREE)

 

C6103 is solvent soluble fluoro chemical resin for P/U coating to make artificial leather, it can be mixed with P/U resin, DMF and toner.

Artificial leather treated by C6103 has got a excellent properties as water & oil repellency and chemical resistance(acid resistanceㆍ alkali resistanceㆍ especially, hydrolysis resistance).C6103 doesn't contain PFOA

(Perfluorooctanoic acid). It is a environment-friendly fluoro carbon base water repellent.

 

<GENERAL PROPERTIES>

 

Appearance:Transparency or semi-transparency yellow liquid

Effective component:Above 60% (at 105℃ X 90min)

Viscosity:below 2000 cps (at 25℃)

Solvent:DMF / MEK

 

<SPECIFICATIONS>

 

1. C6103 is PFOA free fluoro carbon base water repellent.

2. C6103 is a environment-friendly product.

3. C6103 has a very low surface tension energy.

4. C6103 has a excellent water & oil repellency.

5. P/U coating film treated by C6103 has got a excellent properties as chemical resistance(acid resistanceㆍalkali resistanceㆍespecially, hydrolysis resistance).

6. C6103 has low moisture absorbtion and high grade hydrostatic pressure effect to treated fabrics.

7. C6103 can be used mixing with P/U resin, solvent and toner without any catalyst and cross linker.

8. C6103 has a good compatibility with various P/U resin.

<APPLICATIONS>

 

1. Artificial leather wet-dipping process.

* Recipe : PU Resin : 100

C6103 : 0.3 - 0.8

Toner : 5

DMF : 220 - 250

 

⇒ Parts of P/U resin 100

 

Picture (1)

 

                A : NWF (220g/m²)

          B : Dipping solution

          C : Squeezing roller (Pick up : 700g/m²)

          D :  Heating drum (Semi-drying, Moisture : 20-50%) 

             E : Coating solution

F : Coagulation bath (DMF : 20-25% + Water : 75-80%, Temp : 25-35℃) 

G  :  Washing

 

2. Artificial leather wet-coating process

* Recipe : PU Resin : 100

C6103 : 0.5 - 1.0

Toner : 5

DMF : 40 - 50

 

⇒ Parts of P/U resin 100

 

* rocess : Same as picture (1)

3. Water proof and breathable fabrics wet-coating process.

* Recipe : PU Resin : 100

Surfactant : 2 - 3

C6103 : 0.5 - 0.7

Toner : 5

DMF : 50 - 70

 

⇒ Parts of P/U resin 100

* Process

 

Picture (2)

 

A : Fabric                                      G : Coagulation bath

B : Water bone W/R agent bath       H : Washing bath     

C : Mangle               I : Dryer

D : Semi-dryer                               J : Finishing agent treating bath

E : Under-coating                              K : Curing tentor

F : Top-coating                              L : Finished fabric

 

 

4. Water proof and breathable fabrics dry-coating process.

* Recipe : PU Resin : 100

Surfactant : 2 - 3

C6103 : 0.2 - 0.6

Toner : 5

DMF : 50 - 70

 

⇒ Parts of P/U resin 100

* Process

 

A : Fabric    D : Coating fabric

B : Resin     E : Tentor

C : Coater   F : Finished fabric

 

<STORAGE AND HANDLING>

1. Store in -5℃  ~ 40℃. Avoid from direct fire and light.

2. Close a cover fasten.

 

< CAUTION >

Don't eat this product and further detail contents is in MSDS.

1. Do you have other manufacture plant?

Yes, we have four factories in Dongguan, Guangzhou, Qingyuan and Yunfu. It mainly produces fine chemicals, textile auxiliaries, daily chemical raw materials and daily chemical products.

 

2. Are you trading company or manufacturer?

We are a large scale textile chemical auxiliaries manufacturer.

 

3. What’s your lead time?

Generally it will be takes 2-5 working days. It depends on the order quantity.

 

4. How does your factory do regarding quality control?

Quality is priority.The product quality is controlled strictly in every steps by QC department.