Availability: | |
---|---|
C6303
JERVAY
WATERPROOF AGENT C6303
FLUORO CARBON BASED W/R, O/R & S/R AGENT (DURABLE TYPE ) ENVIRONMENT-FRIENDLY PRODUCT (PFOA / PFOS / APEO FREE)
NEOGUARD C6303 doesn't contain PFOA(Perfluorooctanoic acid) inducing endocrine disrupting chemicals. It doesn't have inflammability, volatility. It is a environment- friendly fluoro carbon base water/oil repellent.
NEOGUARD C6303 can be used for fabrics, non woven fabric, paper, and synthetic leather. NEOGUARD C6303 is specially effective to cellulosic fabrics, especially cotton, polyester, Rayon and their blends, Nylon, Acryl, P/C, P/NP, and Spandex by usage of small quantity.
<PHYSICAL PROPERTIES>
Appearance : Milky emulsion
Effective component :Standard - 30% ± 1
Ionic nature : Slightly cation
pH : 4±2
Solubility : Easily in water
<CHARACTERISTIC>
1、C6303 is PFOA / PFOS / APEO free.
2、C6303 is a environment-friendly product.
3、C6303 is suitable water repellent agent for cellulosic fabrics,especially cotton, polyester,
Rayon and their blends, Nylon, Acryl, P/C, P/NP, and Spandex by usage of small quantity.
4、C6303 has a good Internal bond strength with coating resin (PU, Acryl)
5、 C6303 has a good compatibility with other auxiliaries because of slightly cationic nature.
6、C6303 maintains stable emulsion by good physical stability to mechanical condition as high temperature, high pressure and high speed etc.
7、C6303 also has wide pH stable range but weak acid helpful for absorbance.
8、C6303 has not trouble caused by gum-up, separation, break of emulsion.
Rayon and their blends, Nylon, Acryl, P/C, P/NP, and Spandex by usage of small quantity.
<TREATING METHOD>
1、C6303 can be diluted with water and treating process is
Padding
Spray --> Dry --> Cure
Foam spread
* Adjust of bath(In the case of mixing with penetrating agent, resin and other finishing agent)
1) Put water in bath by 50% of total solution.
2) Agitate enough after put a other chemicals according to maker's recommendation.
3) Add C6303 to prepared bath and agitate slowly.
* Adjust of bath(In the case of mixing with penetrating agent, resin and other finishing agent)
4) Put water in bath by 50% of total solution.
5) Agitate enough after put a other chemicals according to maker's recommendation.6) Add C6303 to prepared bath and agitate slowly.
<APPLICATION>
Fabric | Padding | Tentering |
Cotton | 50-70 g/l | 160°C X 120sec |
Polyester | 40-60 g/l | 160°C X 60sec |
Nylon | 40-60 g/l | 170°C X 60sec |
Acryl | 40-60 g/l | 170°C X 60sec |
P/C(=T/C) | 40-60 g/l | 160°C X 90sec |
PNP | 40-60 g/l | 160°C X 90sec |
P/U(Spandex) | 40-60 g/l | 150°C X 120sec |
※ Prescription processing (for washing durability processing)
- C6303 (Water repellent) 100pt + WC-800 (Catalyst) 10pt
<PREPARATION FOR FINISHING>
1. Fabrics
1) Remove impurities by pre-treatment procedure. Alkali, spinning oil, sizing agent and other
surfactant are bad influenced to repellency.
2) After dyeing, remove completely a surfactant as levelling agent, dispersing agent and
penetrating agent, etc.
Reasonable pH condition is 5-6 and avoid from alkaline solution, it can be the factor of Gum-up and low water repellency.
2. Bath
1) Put water in bath by 50% of needed solution
2) Put resin, softener and etc according to the quantity consumed
Put reasonable amount of C6303 and check the bath condition (pH,stability If pH condition is exceed 7.0, add acid. Stability is problem, add IPA.
<OTHERS>
1. Avoid from mixing with anionic auxiliaries.
2. Fixing agent of reactive dyes can be influenced to water repellency.
3. Best repellency effect is needed proper repellent agent and catalyst.
4. Treatment with antipastic agent is needed careful consideration.
5. Remove floating matters in bath or some over-flow is better.
8. When bath color is changed by dyes come out from fabric, bath cleaning is needed.
9. Small size and auto-feeding bath is reasonable for W/R finish because it is effective to prevent ending or tailing.
<STORAGE AND HANDLING>
1. Store in -5°C ~ 40°C. Avoid from direct fire and light.
2. Close a cover fasten.
3. Low toxic but prohibit contact with the skin, eyes, inhalation and swallowing.
<OTHER INFORMATION>
Don't eat this product and further detail contents is in MSDS.
1.How to confirm the Product Quality before placing orders?
You can get some sample, or we can send certificate of analysis or HPLC or NMR to you.
2.Could we use our DHL/FEDEX/TNT account to ship the samples?
Yes, our products can use these express delivery to send samples. Our products are not dangerous goods, and we often send samples abroad to customers.
3.Is it possible to custom the labels with our own design?
Yes, just send us your artworks, you will get what you want.
4.Can I get free samples?
We can provide you a certain amount of free samples,please contact us directly.
5.How can i get the price?
Please give us the exact quantity,packing,destination port and other necessary information,we will give you quotation according to your specific requirements.
6. I am not sure whether your product is appropriate in my case,what should i do?
The best way is according to your usage,we suggest you some samples,if you check is OK ,we will quote a price for you if you are satisfactory after the confirmation ,you can place an order.
WATERPROOF AGENT C6303
FLUORO CARBON BASED W/R, O/R & S/R AGENT (DURABLE TYPE ) ENVIRONMENT-FRIENDLY PRODUCT (PFOA / PFOS / APEO FREE)
NEOGUARD C6303 doesn't contain PFOA(Perfluorooctanoic acid) inducing endocrine disrupting chemicals. It doesn't have inflammability, volatility. It is a environment- friendly fluoro carbon base water/oil repellent.
NEOGUARD C6303 can be used for fabrics, non woven fabric, paper, and synthetic leather. NEOGUARD C6303 is specially effective to cellulosic fabrics, especially cotton, polyester, Rayon and their blends, Nylon, Acryl, P/C, P/NP, and Spandex by usage of small quantity.
<PHYSICAL PROPERTIES>
Appearance : Milky emulsion
Effective component :Standard - 30% ± 1
Ionic nature : Slightly cation
pH : 4±2
Solubility : Easily in water
<CHARACTERISTIC>
1、C6303 is PFOA / PFOS / APEO free.
2、C6303 is a environment-friendly product.
3、C6303 is suitable water repellent agent for cellulosic fabrics,especially cotton, polyester,
Rayon and their blends, Nylon, Acryl, P/C, P/NP, and Spandex by usage of small quantity.
4、C6303 has a good Internal bond strength with coating resin (PU, Acryl)
5、 C6303 has a good compatibility with other auxiliaries because of slightly cationic nature.
6、C6303 maintains stable emulsion by good physical stability to mechanical condition as high temperature, high pressure and high speed etc.
7、C6303 also has wide pH stable range but weak acid helpful for absorbance.
8、C6303 has not trouble caused by gum-up, separation, break of emulsion.
Rayon and their blends, Nylon, Acryl, P/C, P/NP, and Spandex by usage of small quantity.
<TREATING METHOD>
1、C6303 can be diluted with water and treating process is
Padding
Spray --> Dry --> Cure
Foam spread
* Adjust of bath(In the case of mixing with penetrating agent, resin and other finishing agent)
1) Put water in bath by 50% of total solution.
2) Agitate enough after put a other chemicals according to maker's recommendation.
3) Add C6303 to prepared bath and agitate slowly.
* Adjust of bath(In the case of mixing with penetrating agent, resin and other finishing agent)
4) Put water in bath by 50% of total solution.
5) Agitate enough after put a other chemicals according to maker's recommendation.6) Add C6303 to prepared bath and agitate slowly.
<APPLICATION>
Fabric | Padding | Tentering |
Cotton | 50-70 g/l | 160°C X 120sec |
Polyester | 40-60 g/l | 160°C X 60sec |
Nylon | 40-60 g/l | 170°C X 60sec |
Acryl | 40-60 g/l | 170°C X 60sec |
P/C(=T/C) | 40-60 g/l | 160°C X 90sec |
PNP | 40-60 g/l | 160°C X 90sec |
P/U(Spandex) | 40-60 g/l | 150°C X 120sec |
※ Prescription processing (for washing durability processing)
- C6303 (Water repellent) 100pt + WC-800 (Catalyst) 10pt
<PREPARATION FOR FINISHING>
1. Fabrics
1) Remove impurities by pre-treatment procedure. Alkali, spinning oil, sizing agent and other
surfactant are bad influenced to repellency.
2) After dyeing, remove completely a surfactant as levelling agent, dispersing agent and
penetrating agent, etc.
Reasonable pH condition is 5-6 and avoid from alkaline solution, it can be the factor of Gum-up and low water repellency.
2. Bath
1) Put water in bath by 50% of needed solution
2) Put resin, softener and etc according to the quantity consumed
Put reasonable amount of C6303 and check the bath condition (pH,stability If pH condition is exceed 7.0, add acid. Stability is problem, add IPA.
<OTHERS>
1. Avoid from mixing with anionic auxiliaries.
2. Fixing agent of reactive dyes can be influenced to water repellency.
3. Best repellency effect is needed proper repellent agent and catalyst.
4. Treatment with antipastic agent is needed careful consideration.
5. Remove floating matters in bath or some over-flow is better.
8. When bath color is changed by dyes come out from fabric, bath cleaning is needed.
9. Small size and auto-feeding bath is reasonable for W/R finish because it is effective to prevent ending or tailing.
<STORAGE AND HANDLING>
1. Store in -5°C ~ 40°C. Avoid from direct fire and light.
2. Close a cover fasten.
3. Low toxic but prohibit contact with the skin, eyes, inhalation and swallowing.
<OTHER INFORMATION>
Don't eat this product and further detail contents is in MSDS.
1.How to confirm the Product Quality before placing orders?
You can get some sample, or we can send certificate of analysis or HPLC or NMR to you.
2.Could we use our DHL/FEDEX/TNT account to ship the samples?
Yes, our products can use these express delivery to send samples. Our products are not dangerous goods, and we often send samples abroad to customers.
3.Is it possible to custom the labels with our own design?
Yes, just send us your artworks, you will get what you want.
4.Can I get free samples?
We can provide you a certain amount of free samples,please contact us directly.
5.How can i get the price?
Please give us the exact quantity,packing,destination port and other necessary information,we will give you quotation according to your specific requirements.
6. I am not sure whether your product is appropriate in my case,what should i do?
The best way is according to your usage,we suggest you some samples,if you check is OK ,we will quote a price for you if you are satisfactory after the confirmation ,you can place an order.
Contact person: Mr. Finn
Mobile No.: + 86 15014751722