Reactive Dye Friction Fastness Improver for Dark Fabric

WET RUBBING FASTNESS IMPROVER JV-508

reactive dye friction fastness improver for dark fabric

I. PRODUCT PROFILE

 The active, vulcanized, direct and indigo dyes are particularly low when they are dyed thick and dark on cellulose fibers, especially in the case of large black, red and green blue, which are often lower than grade 1, while the textile products exported to Europe and the United States require more than grade 3 to improve the stability of the products to salt and alkali and to reduce the shortage of the structure of the products themselves. Therefore, the environmentally friendly wet rubbing fastness agent has been specially developed.

 II. MAIN COMPONENTS    

 Special Waterborne Polyurethane

 III. TECHNICAL INDICATORS

PH value: 3.5 ± 0.5 (50g / L)

Appearance: light yellow to yellow transparent liquid

Ionic: weak cation

Solubility: easily dispersed in any proportion of tap water

 IV. MAIN PERFORMANCE

1. This product does not contain formaldehyde and APEO. It belongs to environmental protection product and meets the requirements of EU Oeko-Tex Standard 100.

2. It can be used for fixing after dyeing cellulose fiber; it can greatly improve the wet friction effect, which can be increased by 1-1.5 grade, reaching more than 3 grade.

3. It is easy to use, and it can be used directly with water.

4. The handle of the fabric is soft, and has no effect on the color light and sunlight fastness.

5. For jeans washing is more prominent.

 V. APPLICATION METHODS

  Depending on the type and concentration of the dye used, the type and shape of the treated fabric are as follows:

1. dipping method: JV-508：30~50 g/L;

 Process: dyed color cloth (PH≤7)→ one dip and one rolling (residual rate :80~85%) drying

2. impregnation (limited to washing plants) 

 Dosage: JV-508：2~4%(o.w.f .)(Depth adjustment)

 Bath :1:10~20 

 Process: dyed color cloth (PH≤7)→ impregnated (room temperature, time :20~30 min)→ dried

VI. NOTES

1. Please use it immediately after preparation, and do a good job of sample test before use. The above process is only for reference.

2. The wet rubbing fastness improver jv-508 can only be used alone, and cannot be used in the same bath with silicone oil, softener, fixing agent and anionic additive.

3. The temperature of working fluid should be controlled between 25 ℃ and room temperature.

4. Before using the wet rubbing fastness improver jv-508, clean the cloth surface alkali (control pH ≤ 7), salt and soaping agent.

5. use a long time to produce a large amount of foam in the rolling tank. Clear the foam or clean the groove and replace the working fluid in time.

6. Try to keep the pH value of working fluid in the range of 5-6.

7. The water used for working fluid should be tap water ≤ 100ppm.

 VII. PACKAGING STORAGE

Shelf life: 125kg / barrel, sealed for 6 months.

38.How to know the exact price for textile chemicals color fixing agent for dying?

Tell us the specification request,quantity,packing,destination port and as much as order info, then we can check and reply you a latest and exact price.

39.We have more questions, how to contact you?

Welcome to contact us with below number：+86 150 1475 1722

40.What terms of payment you use?

As for the payment terms,it depends on the total amount,pls check below: 

1.Payment method:T/T or Paypal. 

2.Total amount is less than USD $2000,100% pre-paid by T/T.In this way,the buyer could avoid second time bank handing charge. 

3.Total amount is over USD $2000,T/T 30% deposit before production,70% balance against BL copy.