Cationic Wet Rubbing Fastness Improver for Printing JV-528

WET RUBBING FASTNESS IMPROVER JV-528

cationic wet rubbing fastness improver for Printing JV-528

I. PRODUCT PROFILE

 The active, vulcanized, direct and indigo dyes are particularly low when they are dyed thick and dark on cellulose fibers, especially in the case of large black, red and green blue, which are often lower than grade 1, while the textile products exported to Europe and the United States require more than grade 3 to improve the stability of the products to salt and alkali and to reduce the shortage of the structure of the products themselves. Therefore, the environmentally friendly wet rubbing fastness agent has been specially developed.

 II. MAIN COMPONENTS    

 Special Waterborne Polyurethane

 III. TECHNICAL INDICATORS

 Appearance: light yellow to yellow transparent liquid

Ionic: weak cation

PH value: 3.5 ± 0.5 (50g / L)

Solubility: easily dispersed in any proportion of tap water

 IV. MAIN PERFORMANCE

1. This product does not contain formaldehyde and APEO. It belongs to environmental protection product and meets the requirements of EU Oeko-Tex Standard 100;

2. It can be used for fixing after dyeing cellulose fiber; it can greatly improve the wet friction effect, which can be increased by 1-1.5 grade, reaching more than 3 grade;

3. It is easy to use, and it can be used directly with water;

4. The handle of the fabric is soft, and has no effect on the color light and sunlight fastness;

5. For jeans washing is more prominent.

 V. APPLICATION METHODS

 According to the type and concentration of dyes used and the types and forms of treated fabrics, the usage is as follows:

1. Dip rolling process dosage: jv-528:30-50g / L;

Process: dyed fabric (pH ≤ 7) → dip and roll (rolling yield: 80 ～ 85%) → drying

2. Impregnation method (limited to water treatment plant)

Dosage: jv-528: 2-4% (o.w.f.)

Bath ratio: 1:10 ~ 20

Process: dyed fabric (pH ≤ 7) → dipping (room temperature, time: 20 ~ 30min) → drying

 VI. POINTS FOR ATTENTION

1. Please use it immediately after preparation, and do a good job of sample test before use. The above process is only for reference.

2. The wet rubbing fastness improver jv-528 can only be used alone, and cannot be used in the same bath with silicone oil, softener, fixing agent and anionic additive.

3. The temperature of working fluid should be controlled between 25 ℃ and room temperature.

4. Try to keep the pH value of working fluid in the range of 5-6.

5. Before using the wet rubbing fastness improver jv-528, clean the cloth surface alkali (control pH ≤ 7), salt and soaping agent.

6. use a long time to produce a large amount of foam in the rolling tank. Clear the foam or clean the groove and replace the working fluid in time.

7. The water used for working fluid should be tap water ≤ 100ppm.

 VII. PACKAGING STORAGE

125kg / plastic barrel, sealed at room temperature, shelf life of 6 months.

1.I am not sure whether your product is appropriate in my case,   what should i do?

A: The best way is according to your usage,   we suggest you some samples,   if you check is OK ,we will quote a price for you if you are satisfactory after the confirmation ,you can place an order.

2.How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment

3. Why should you buy from us not from other suppliers?
Dongguan Jervay Chemical Co.,Ltd is a specialized chemical company along with production ,R&D,and import & export